NSXNational Skills ExchangeSign in
Back to Framework

Geothermal Technicians

SOC 49-9099.01Job Zone 2 · Some Preparationv.26.05

Context coveredThis framework covers installation, monitoring, troubleshooting, maintenance, and documentation of geothermal power plant equipment and loop piping systems, from supervised entry-level field tasks through organizational leadership in a Job Zone 2 installation and maintenance context.

Sources:O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.SkillsCrosswalkSkillsCrosswalk — O*NET enrichment + adjacency index. Opens in new tab.
Emerging
Entry / Apprentice
  1. Geothermal plant equipment gauges and readouts — monitor and report observed values under direct supervision during routine shift walkthroughs.
  2. Operations logs and daily work reports — complete accurately using standard templates with guidance from a senior technician.
  3. Basic equipment malfunctions — recognize and report warning signs to a lead technician in a geothermal plant environment.
  4. Field data from well sensors and flow meters — collect and record systematically onto provided data sheets during supervised site visits.
  5. Pre-installation pressure and flow test procedures — assist with and observe on vertical geothermal loop piping under technician direction.
  6. Equipment manuals and technical schematics — read and interpret basic sections to identify component names and functions with supervisor support.
  7. Hand tools and basic test instruments — identify and use correctly under direct supervision on a geothermal installation job site.
  8. Safety protocols and emergency procedures — follow precisely as instructed during plant operations and equipment handling tasks.
  9. Spreadsheet and word processing software — enter operational data and format basic reports under guidance in an office or control room setting.
  10. Geothermal system components including pumps and piping — identify by name and describe basic function during supervised orientation tours.
Developing
Mid-level / Established
  1. Geothermal power plant equipment and control systems — monitor, adjust, and document operating parameters routinely with minimal oversight during standard shifts.
  2. Operational logs, maintenance records, and shift reports — prepare and maintain accurately and on schedule using established formats and software tools.
  3. Common equipment malfunctions in electrical systems and instrumentation — troubleshoot using diagnostic procedures and correct within the scope of routine maintenance tasks.
  4. Well field and plant performance data — collect, record, and review for consistency and accuracy, flagging anomalies to the shift supervisor.
  5. Post-installation pressure, flow, and leak tests — perform independently on horizontal and vertical geothermal loop piping and document results clearly.
  6. Auxiliary and backup heating or cooling systems — assess activation needs during moderately adverse weather conditions using established decision criteria.
  7. Industrial control software and SCADA interfaces — operate to monitor system status and make approved parameter adjustments in a plant control room.
  8. Compressor and pump equipment options — evaluate specifications against operational requirements and select appropriate units following established guidelines.
  9. CAD and GIS software — use at a basic level to retrieve site layout diagrams and loop field maps in support of installation and maintenance tasks.
  10. Preventive maintenance schedules for geothermal heat pumps and associated equipment — execute and record outcomes using standard checklists and ERP software.
Proficient
Senior / Expert IC
  1. Geothermal plant equipment, electrical systems, and control instrumentation — diagnose complex faults autonomously and implement effective repairs across the full system scope.
  2. Plant and well field operating logs, incident reports, and regulatory documentation — produce complete, accurate, and compliant records independently for all work performed.
  3. Non-routine malfunctions involving mechanical, electrical, and instrumentation systems — analyze root causes using systematic troubleshooting techniques and restore operations with minimal downtime.
  4. Operational data sets from sensors, flow meters, and analytical software — interpret trends, identify performance deviations, and recommend corrective actions to plant management.
  5. Emergency and auxiliary heating or cooling system requirements — determine independently under extreme or rapidly changing weather conditions using critical judgment and system knowledge.
  6. Full pressure, flow, and thermal performance test sequences — plan, execute, and evaluate for both vertical and horizontal loop piping installations to verify system integrity.
  7. Equipment selection decisions for compressors, heat exchangers, and pumps — make informed choices by applying knowledge of mechanical principles, physics, and site-specific operating conditions.
  8. CAD drawings and GIS-based well field maps — interpret and apply to troubleshoot installation geometry issues and plan system expansions in the field.
  9. Systems analysis techniques — apply to evaluate geothermal plant efficiency, identify process improvement opportunities, and present findings using analytical and spreadsheet software.
  10. Complex problem-solving across geothermal installation and maintenance scenarios — lead resolution efforts by coordinating with engineers, inspectors, and field crews to restore or optimize system performance.
Advanced
Lead / Principal / Executive
  1. Geothermal plant operations standards and maintenance protocols — develop, review, and update organization-wide procedures based on operational experience and emerging industry best practices.
  2. Documentation and reporting systems for plant performance and compliance — design and oversee implementation across multiple sites to ensure regulatory accuracy and management visibility.
  3. Technical troubleshooting methodology and diagnostic toolkits — establish and train field teams on systematic approaches for resolving electrical, mechanical, and instrumentation failures.
  4. Data collection and performance monitoring programs — design and direct for entire well field and plant portfolios, using analytical software to drive evidence-based operational decisions.
  5. Emergency preparedness and auxiliary system activation plans — author and coordinate across facilities, ensuring crews are trained and resources are positioned for extreme weather scenarios.
  6. Quality control and testing standards for geothermal loop piping installations — set organizational benchmarks, audit field execution, and lead corrective action processes for non-conforming work.
  7. Equipment procurement strategy for compressors, heat pumps, and ancillary systems — lead vendor evaluation, specification development, and selection decisions at the organizational level.
  8. CAD, GIS, and ERP software platforms — champion adoption and integration across technical and administrative teams to improve installation planning, asset tracking, and reporting efficiency.
  9. Emerging geothermal technologies and system design innovations — evaluate technical viability, lead pilot implementations, and guide organizational investment decisions in new capabilities.
  10. Workforce development programs for geothermal technician teams — design training curricula, mentor developing and proficient technicians, and build organizational depth in installation, maintenance, and operations competencies.

AI-at-Work Competency Framework

Sources:Anthropic Economic IndexAnthropic Economic Index — release_2026_03_24. Opens in new tab.Jadhav & Danve, 2026Skill Automation Feasibility Index — Jadhav & Danve, 2026 (arXiv:2604.06906). Opens in new tab.WEF Skills TaxonomyWEF Skills Taxonomy 2021 — Building a Common Language for Skills at Work. Opens in new tab.
Subscriber feature

Authoritative source data identified for 998 occupations

How a worker at each mastery level uses, directs, and evaluates AI tools in this occupation. Each statement cites its evidence inline; click a citation chip to verify the source.

Emerging
  1. AI-generated equipment status summaries — reads AI-produced condition reports for geothermal plant systems to build familiarity with normal operating parameters before attempting independent monitoring WEF Skills TaxonomyWEF Skills Taxonomy 2021 — Building a Common Language for Skills at Work. Opens in new tab..
  2. Log and report drafting — uses AI text tools to format routine maintenance logs and shift reports, reviewing output for accuracy against handwritten field notes.
Developing
  1. Anomaly flag review — cross-references AI-flagged deviations in temperature, pressure, or flow readings against personal instrument checks, using the comparison to sharpen fault-recognition judgment Jadhav & Danve, 2026Skill Automation Feasibility Index — Jadhav & Danve, 2026 (arXiv:2604.06906). Opens in new tab..
  2. Troubleshooting query delegation — submits symptom descriptions of electrical or instrumentation faults to an AI assistant to retrieve candidate root causes, then physically inspects the plant to confirm or eliminate each possibility Jadhav & Danve, 2026Skill Automation Feasibility Index — Jadhav & Danve, 2026 (arXiv:2604.06906). Opens in new tab..
  3. Data entry acceleration — directs AI tools to parse and structure well-field sensor logs into standardized spreadsheets, verifying completeness against raw collection sheets before submission.
Proficient
  1. Operations monitoring augmentation — runs AI-assisted dashboards that surface out-of-range geothermal parameters in real time, while maintaining independent watch-standing discipline to catch false negatives the model misses Jadhav & Danve, 2026Skill Automation Feasibility Index — Jadhav & Danve, 2026 (arXiv:2604.06906). Opens in new tab. WEF Skills TaxonomyWEF Skills Taxonomy 2021 — Building a Common Language for Skills at Work. Opens in new tab..
  2. Emergency-condition pre-assessment — queries an AI decision-support tool with current weather forecasts and load data to evaluate whether auxiliary heating or cooling systems will be required, then validates the recommendation against plant capacity records WEF Skills TaxonomyWEF Skills Taxonomy 2021 — Building a Common Language for Skills at Work. Opens in new tab..
  3. Maintenance procedure lookup — directs an AI assistant to retrieve and summarize OEM documentation for specific equipment, confirming retrieved steps against physical manuals before executing work.
  4. Quality control cross-check — feeds recorded operating data into an AI analysis tool to identify drift trends in geothermal output quality, integrating findings into corrective-action reports Jadhav & Danve, 2026Skill Automation Feasibility Index — Jadhav & Danve, 2026 (arXiv:2604.06906). Opens in new tab..
Advanced
  1. Predictive fault modeling oversight — evaluates AI-generated predictive maintenance models against multi-season plant performance data, adjusting alert thresholds based on site-specific geology and equipment age Jadhav & Danve, 2026Skill Automation Feasibility Index — Jadhav & Danve, 2026 (arXiv:2604.06906). Opens in new tab. WEF Skills TaxonomyWEF Skills Taxonomy 2021 — Building a Common Language for Skills at Work. Opens in new tab..
  2. Cross-system diagnostic choreography — directs AI agents through sequential analysis of electrical, instrumentation, and control subsystems during complex malfunctions, retaining decision authority on any intervention that risks plant shutdown.
  3. AI tool fitness assessment — benchmarks competing AI monitoring platforms against geothermal-specific operating conditions, recommending adoption or rejection based on false-alarm rates and integration with existing SCADA infrastructure WEF Skills TaxonomyWEF Skills Taxonomy 2021 — Building a Common Language for Skills at Work. Opens in new tab..
Evidence pack
SAFI positioning
Top skill: Operations Monitoring
Score: 62.1 / 100
precision: category_estimate
WEF cluster
Technology Use, Monitoring and Control
technology_use_monitoring_control
Sources:WEF Skills TaxonomyWEF Skills Taxonomy 2021 — Building a Common Language for Skills at Work. Opens in new tab.Jadhav & Danve, 2026Skill Automation Feasibility Index — Jadhav & Danve, 2026 (arXiv:2604.06906). Opens in new tab.

Pathsmith Durable Skills Framework

Sources:Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Subscriber feature

Ten durable-skill domains mapped to four proficiency/role levels for each occupation. Each statement is aligned to the Pathsmith taxonomy, derived from trusted grounding data and mapped to occupation-specific O*NET tasks and skills.

1Communication8 statements
Emerging
  1. Equipment status reporting — documents basic geothermal plant readings and logs operational data using standard forms and templates Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Verbal relay — communicates observed equipment anomalies to supervisors using plant-specific terminology during shift handoffs Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
Developing
  1. Maintenance log authoring — prepares clear, accurate logs and reports of geothermal system work performed, including pressure and flow test results, for review by senior technicians Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Cross-shift briefing — conveys geothermal plant status, active alarms, and pending tasks to incoming shift personnel using structured verbal and written formats Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
Applying
  1. Incident documentation — authors detailed malfunction reports identifying root causes, corrective actions, and outcomes for geothermal electrical systems and instrumentation with accuracy sufficient for regulatory review Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Stakeholder communication — explains geothermal loop installation test results and equipment performance data to property owners or facility managers in accessible, non-technical language Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Exceeding
  1. Technical writing leadership — develops standardized reporting templates and communication protocols for geothermal plant operations logs, ensuring consistency across the technician team Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Cross-functional coordination — leads communication between field installation crews, plant engineers, and safety officers during complex geothermal system upgrades or emergency response events Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
2Leadership8 statements
Emerging
  1. Task ownership — completes assigned geothermal equipment monitoring duties without requiring repeated direction, demonstrating personal responsibility for data accuracy Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Peer awareness — identifies when a fellow technician needs assistance during pre-installation loop piping pressure tests and offers support within scope Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
Developing
  1. Work site coordination — organizes daily geothermal loop installation workflow, sequencing pressure, flow, and leak tests to maintain schedule and safety compliance Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Decision escalation — assesses geothermal plant malfunctions and independently determines when an issue requires supervisor or engineer escalation versus field correction Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Applying
  1. Emergency judgment — determines whether auxiliary or emergency heating and cooling systems must be activated during extreme weather, taking initiative and assuming accountability for the decision Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Junior technician guidance — directs less experienced geothermal technicians through equipment selection processes, such as compressor sizing, explaining the rationale behind each choice Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Exceeding
  1. Plant operations leadership — assumes shift lead responsibilities for geothermal power plant operations, setting priorities, assigning monitoring tasks, and holding team accountable for safety and output targets Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Continuous improvement initiative — champions adoption of improved monitoring procedures or control system protocols across the geothermal facility, driving measurable gains in system uptime Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
3Metacognition8 statements
Emerging
  1. Self-monitoring awareness — recognizes gaps in personal understanding of geothermal plant instrumentation and seeks clarification before executing control adjustments Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Learning reflection — identifies which troubleshooting steps were effective or ineffective after resolving a geothermal equipment malfunction and notes lessons for future reference Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
Developing
  1. Knowledge gap identification — assesses own proficiency with geothermal loop piping test procedures and proactively requests training or reference materials to address deficiencies Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Task planning review — evaluates own pre-shift preparation process after completing geothermal plant monitoring duties and adjusts routines to improve data collection accuracy Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Applying
  1. Diagnostic strategy awareness — reflects on the reasoning sequence used to identify geothermal electrical system faults and deliberately refines troubleshooting logic for greater efficiency Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Skill calibration — accurately assesses own competence boundaries when selecting geothermal equipment options, distinguishing decisions within independent authority from those requiring engineering input Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
Exceeding
  1. Mentored metacognition — coaches junior technicians to examine their own diagnostic assumptions during geothermal plant troubleshooting, building self-correcting habits across the team Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Systemic learning integration — synthesizes patterns from multiple equipment failures and personal knowledge gaps to recommend targeted training curricula for geothermal technician development programs Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
4Critical Thinking8 statements
Emerging
  1. Data interpretation — compares recorded geothermal well field readings against normal operating ranges to identify values that warrant further investigation Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Procedure verification — cross-checks steps in geothermal loop pressure test procedures against written instructions to confirm correct execution before proceeding Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Developing
  1. Malfunction analysis — analyzes geothermal plant instrument readings and control system behavior to isolate the probable source of operational deviations before attempting repairs Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Evidence evaluation — evaluates multiple sensor data points and physical inspection findings to distinguish sensor failure from actual geothermal system malfunction Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Applying
  1. Root cause determination — applies systematic fault-tree reasoning to identify underlying causes of recurring geothermal electrical or mechanical failures, moving beyond symptom correction to source elimination Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Equipment selection reasoning — evaluates performance specifications, site conditions, and load requirements to justify compressor or heat pump selection decisions with documented rationale Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Exceeding
  1. Predictive risk assessment — integrates historical plant data, physics-based principles, and operational trends to anticipate geothermal system failure modes before they manifest, recommending preemptive maintenance Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Judgment framework development — establishes decision criteria and logic trees for common geothermal plant emergency scenarios, enabling faster and more consistent critical thinking across the technician team Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
5Collaboration8 statements
Emerging
  1. Team task participation — assists experienced geothermal technicians during vertical and horizontal loop piping installations, following direction and contributing physical and observational support Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Information sharing — relays collected well field data to colleagues promptly and accurately, enabling coordinated plant monitoring across shifts Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Developing
  1. Installation crew coordination — works with pipe installers, equipment operators, and inspectors during geothermal loop field construction, aligning task sequencing to avoid delays and conflicts Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Cross-discipline cooperation — collaborates with electricians and controls technicians to diagnose geothermal plant instrumentation faults that span mechanical and electrical systems Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Applying
  1. Multi-stakeholder project execution — coordinates with property owners, HVAC contractors, and utility representatives during geothermal system commissioning, ensuring shared understanding of test results and system status Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Shift team integration — contributes to a cohesive geothermal plant operations team by maintaining accurate shared logs, supporting peer workloads during high-demand periods, and resolving task conflicts constructively Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
Exceeding
  1. Inter-team process alignment — leads coordination between geothermal installation crews and plant operations staff during system expansions, reconciling conflicting priorities and establishing shared workflows Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Collaborative problem resolution — facilitates joint troubleshooting sessions involving technicians, engineers, and safety personnel to address complex geothermal plant failures requiring multidisciplinary input Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
6Character8 statements
Emerging
  1. Safety compliance — follows all geothermal plant public safety and security protocols consistently, even when unsupervised, without requiring reminders Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Data integrity — records geothermal system readings and test results accurately, refraining from estimating or omitting values when data collection is inconvenient Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Developing
  1. Accountability ownership — acknowledges errors in geothermal equipment adjustments or data entries promptly, reports them to supervisors, and takes corrective action without deflection Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Regulatory adherence — maintains documentation and operational practices that meet geothermal plant reporting and inspection standards, demonstrating consistent professionalism under audit conditions Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Applying
  1. Ethical equipment reporting — discloses geothermal system performance deficiencies to clients or facility managers accurately, even when findings reflect negatively on prior installation or maintenance work Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Safety culture modeling — demonstrates and reinforces adherence to geothermal plant hazard protocols among peers, setting a behavioral standard that prioritizes worker and public safety over expediency Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Exceeding
  1. Integrity under pressure — maintains accurate incident reporting and transparent communication during geothermal plant emergencies, resisting pressure to minimize or conceal findings that could affect regulatory outcomes Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Professional standards advocacy — identifies gaps in geothermal facility safety or quality practices and formally recommends policy corrections to management, accepting personal accountability for raising concerns Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
7Creativity8 statements
Emerging
  1. Adaptive problem-solving — proposes an alternative diagnostic step when standard geothermal troubleshooting procedures do not resolve an observed equipment anomaly Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Tool improvisation — identifies a practical workaround to perform a geothermal loop pressure test when a required instrument is temporarily unavailable, within safety guidelines Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Developing
  1. Process optimization suggestion — proposes a modification to the geothermal plant data collection sequence that reduces technician travel time between monitoring points without compromising data quality Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Equipment configuration experimentation — tests alternative compressor or heat exchanger configurations during low-risk maintenance windows to evaluate performance improvements in geothermal system output Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Applying
  1. Novel fault diagnosis — develops an original diagnostic method to isolate an intermittent geothermal instrumentation fault that does not match any documented failure mode in available references Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. System efficiency innovation — designs a modified monitoring schedule using existing instrumentation that detects early-stage geothermal well field degradation before it causes unplanned downtime Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
Exceeding
  1. Solution architecture — engineers a custom integration of monitoring tools and control adjustments that improves geothermal plant responsiveness to load fluctuations, presenting the design with supporting data to engineering leadership Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Cross-domain adaptation — imports a diagnostic or maintenance technique from adjacent mechanical or HVAC domains and successfully adapts it to improve geothermal loop field performance testing accuracy Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
8Growth Mindset8 statements
Emerging
  1. Feedback receptivity — accepts correction from experienced geothermal technicians regarding monitoring technique or data recording errors and applies the feedback on the next task without resistance Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Challenge engagement — attempts unfamiliar geothermal equipment control adjustments under supervision rather than deferring all new tasks, treating the experience as a learning opportunity Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
Developing
  1. Skill-building persistence — continues developing proficiency in geothermal electrical system troubleshooting after initial attempts produce incomplete diagnoses, using each failure as diagnostic data Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Training initiative — independently seeks out additional resources on geothermal physics, piping systems, or control instrumentation to expand competency beyond minimum job requirements Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Applying
  1. Setback reframing — treats a geothermal plant equipment failure that occurred on watch as a structured learning event, conducting a self-debrief and adjusting monitoring practices to prevent recurrence Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Feedback integration cycle — solicits performance feedback from supervisors after completing geothermal system commissioning tasks and incorporates specific suggestions into the next installation Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
Exceeding
  1. Mastery modeling — demonstrates to junior geothermal technicians how to treat recurring equipment malfunctions as opportunities to deepen mechanical and electrical knowledge, normalizing a learning culture on the team Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Career development leadership — pursues advanced certifications in geothermal systems or related mechanical disciplines and mentors newer technicians to do the same, expanding team capability over time Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
9Mindfulness8 statements
Emerging
  1. Attentive monitoring — maintains focused attention during geothermal plant operations monitoring shifts, detecting subtle changes in pressure, flow, or temperature readings before they escalate Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Stress recognition — identifies personal signs of fatigue or distraction during extended geothermal plant shifts and applies a brief reset strategy before resuming safety-critical control adjustments Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
Developing
  1. Deliberate task execution — performs geothermal loop pressure and flow tests with intentional step-by-step attention, avoiding rushed procedures that produce inaccurate commissioning data Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Emotional regulation during faults — maintains composed, methodical behavior when geothermal plant alarms trigger, prioritizing systematic diagnosis over reactive responses Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Applying
  1. Situational awareness — sustains comprehensive awareness of geothermal plant system states across multiple simultaneous monitoring points, detecting interdependencies between equipment conditions Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Intentional decision pacing — pauses before executing irreversible geothermal control adjustments to verify readings and confirm intended action, reducing error rate under time pressure Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Exceeding
  1. Team attention management — establishes shift routines and monitoring protocols for the geothermal plant team that promote sustained attentiveness and reduce the risk of monitoring lapses during low-activity periods Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Crisis mindfulness — models calm, present-focused problem-solving during geothermal plant emergencies, stabilizing team performance and preventing compounding errors driven by panic or tunnel vision Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
10Fortitude8 statements
Emerging
  1. Physical persistence — continues geothermal loop piping installation tasks in adverse outdoor conditions, maintaining work quality and safety compliance throughout Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Uncertainty tolerance — proceeds with geothermal plant monitoring duties when equipment behavior is ambiguous, gathering additional data rather than halting or guessing Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Developing
  1. Diagnostic persistence — continues systematic troubleshooting of geothermal electrical or instrumentation faults through multiple failed hypotheses without abandoning the structured diagnostic process Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Shift endurance — maintains monitoring accuracy and documentation quality across full extended shifts during geothermal plant peak demand periods or emergency operations Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Applying
  1. Emergency resilience — executes geothermal plant emergency response procedures under sustained pressure, maintaining operational effectiveness when auxiliary systems must be activated to protect property or safety Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
  2. Repeated setback recovery — returns to full performance after a sequence of unresolved geothermal plant faults, re-engaging troubleshooting with fresh analysis rather than frustration-driven shortcuts Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Exceeding
  1. Team resilience anchoring — sustains team morale and operational focus during prolonged geothermal plant outages or multi-day emergency response events, preventing performance degradation under collective stress Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.
  2. Courageous reporting — formally escalates observed geothermal plant safety deficiencies or regulatory compliance failures despite organizational pressure to minimize findings, demonstrating professional courage Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab. O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Sources:Pathsmith Durable SkillsPathsmith Durable Skills Framework — America Succeeds + CompTIA. Opens in new tab.O*NET v30.2O*NET Resource Center — Occupational Information Network, v30.2 (Sept 2025). Opens in new tab.
Show O*NET source anchors58 anchors · skillscrosswalk.com

O*NET enrichment · skillscrosswalk.com

Suggest an O*NET correction

Source anchors that ground each statement

Related titles
Tower Erector · Corrosion Technician · Design Technician · Distribution Field Technician · Field Distribution Technician · Geothermal Field Technician · Geothermal HVAC Technician (Geothermal Heating, Ventilating, and Air Conditioning Technician) · Geothermal Installer · Geothermal Service Technician · Geothermal System Installer · Geothermal Technician · Ground Source Heat Pump Technician (GSHP Technician)
RAPIDS apprenticeships
0141 · Tower Erector
O*NET skills
Operations MonitoringMonitoringTroubleshootingOperation and ControlQuality Control AnalysisReading ComprehensionCritical ThinkingJudgment and Decision MakingActive LearningRepairingComplex Problem SolvingEquipment MaintenanceCoordinationInstallationSystems AnalysisActive ListeningWritingSpeaking
Knowledge domains
MechanicalEnglish LanguagePhysicsEducation and TrainingPublic Safety and SecurityChemistryDesignTelecommunicationsMathematicsProduction and ProcessingAdministration and ManagementComputers and ElectronicsAdministrativeEngineering and Technology
Abilities
Near VisionProblem SensitivityDeductive ReasoningPerceptual SpeedArm-Hand SteadinessControl PrecisionVisualizationFlexibility of ClosureInformation OrderingSelective Attention
Work styles
—
Technology
Computer aided design CAD softwareAnalytical or scientific softwareIndustrial control softwareElectronic mail softwareGeographic information systemSpreadsheet softwareOffice suite softwareWord processing softwareEnterprise resource planning ERP software
Tasks · seed anchors for statements
  1. Monitor and adjust operations of geothermal power plant equipment or systems.
  2. Prepare and maintain logs, reports, or other documentation of work performed.
  3. Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
  4. Collect and record data associated with operating geothermal power plants or well fields.
  5. Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
  6. Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
  7. Identify equipment options, such as compressors, and make appropriate selections.
CIP education codes
47.000047.010147.040247.040947.070147.070347.070547.070647.0799

Sources: O*NET v30.2 (CC BY 4.0), SkillsCrosswalk.com, LER.me, Anthropic Economic Index, SAFI (Jadhav & Danve, 2026), WEF Skills Taxonomy 2021, Pathsmith Durable Skills Framework. © 2026 EBSCOed.